臺灣長期照顧實作指引 (Taiwan Long-Term Care Implementation Guide)
0.3.0 - ci-build+trial-use

臺灣長期照顧實作指引 (Taiwan Long-Term Care Implementation Guide) - Local Development build (v0.3.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: LTCQuestionnaireResponseCMSMental - Detailed Descriptions

Active as of 2025-08-23

Definitions for the LTCQuestionnaireResponseCMSMental resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. QuestionnaireResponse
Definition

A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.

ShortA structured set of questions and their answers
Comments

The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesForm, QuestionnaireAnswers
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. QuestionnaireResponse.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. QuestionnaireResponse.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. QuestionnaireResponse.questionnaire
Definition

The Questionnaire that defines and organizes the questions for which answers are being provided.

Short這個問卷回覆所回答的問卷。[應填入問卷的 URL]Form being answered
Comments

If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).

Control0..1
Typecanonical(長期照顧-問卷, Questionnaire)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.

Alternate NamesForm
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. QuestionnaireResponse.status
Definition

The position of the questionnaire response within its overall lifecycle.

Short問卷回覆的狀態。[應填入 in-progress / completed / amended / entered-in-error / stopped]in-progress | completed | amended | entered-in-error | stopped
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from QuestionnaireResponseStatushttp://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1)

Lifecycle status of the questionnaire response.

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. QuestionnaireResponse.subject
Definition

The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information.

Short問卷回覆的適用主體The subject of the questions
Comments

If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.

Control10..1
TypeReference(長期照顧-住民基本資料, Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows linking the answers to the individual the answers describe. May also affect access control.

Alternate NamesPatient, Focus
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. QuestionnaireResponse.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Short問卷回覆的適用主體。[應輸入 Patient Resource ID]Literal reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. QuestionnaireResponse.authored
Definition

The date and/or time that this set of answers were last changed.

Short問卷回覆的填寫日期Date the answers were gathered
Comments

May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.

This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible.

Control10..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.

Alternate NamesDate Created, Date published, Date Issued, Date updated
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. QuestionnaireResponse.author
Definition

Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.

Short問卷回覆的填寫者Person who received and recorded the answers
Comments

Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated.

Control0..1
TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色, Device, Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.

Alternate NamesLaboratory, Service, Practitioner, Department, Company, Performer
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. QuestionnaireResponse.author.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Short問卷回覆的填寫者。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]Literal reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. QuestionnaireResponse.source
Definition

The person who answered the questions about the subject.

Short誰提供了問卷回覆的資料,意即誰回答了這份問卷The person who answered the questions
Comments

If not specified, no inference can be made about who provided the data.

Control0..1
TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色, Patient, Practitioner, PractitionerRole, RelatedPerson)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. QuestionnaireResponse.source.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Short誰提供了問卷回覆的資料。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]Literal reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. QuestionnaireResponse.item
Definition

A group or question item from the original questionnaire for which answers are provided.

Short問卷回覆的內容Groups and questions
Comments

Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

Control140..14*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ linkId
  • 26. QuestionnaireResponse.item.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. QuestionnaireResponse.item.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. QuestionnaireResponse.item.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. QuestionnaireResponse.item.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. QuestionnaireResponse.item.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. QuestionnaireResponse.item.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control0..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. QuestionnaireResponse.item.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. QuestionnaireResponse.item:item-I01
    Slice Nameitem-I01
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI01. 遊走Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    42. QuestionnaireResponse.item:item-I01.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. QuestionnaireResponse.item:item-I01.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI01
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. QuestionnaireResponse.item:item-I01.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value遊走
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. QuestionnaireResponse.item:item-I01.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. QuestionnaireResponse.item:item-I01.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    52. QuestionnaireResponse.item:item-I01.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short遊走[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. QuestionnaireResponse.item:item-I01.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. QuestionnaireResponse.item:item-I02
    Slice Nameitem-I02
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI02. 日夜顛倒/作息混亂Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    58. QuestionnaireResponse.item:item-I02.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    60. QuestionnaireResponse.item:item-I02.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI02
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. QuestionnaireResponse.item:item-I02.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value日夜顛倒/作息混亂
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. QuestionnaireResponse.item:item-I02.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. QuestionnaireResponse.item:item-I02.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    68. QuestionnaireResponse.item:item-I02.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short日夜顛倒/作息混亂[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. QuestionnaireResponse.item:item-I02.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. QuestionnaireResponse.item:item-I03
    Slice Nameitem-I03
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI03. 語言攻擊行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    74. QuestionnaireResponse.item:item-I03.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    76. QuestionnaireResponse.item:item-I03.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI03
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. QuestionnaireResponse.item:item-I03.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value語言攻擊行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. QuestionnaireResponse.item:item-I03.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    82. QuestionnaireResponse.item:item-I03.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    84. QuestionnaireResponse.item:item-I03.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short語言攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    86. QuestionnaireResponse.item:item-I03.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    88. QuestionnaireResponse.item:item-I04
    Slice Nameitem-I04
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI04. 肢體攻擊行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    90. QuestionnaireResponse.item:item-I04.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    92. QuestionnaireResponse.item:item-I04.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI04
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    94. QuestionnaireResponse.item:item-I04.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value肢體攻擊行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    96. QuestionnaireResponse.item:item-I04.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    98. QuestionnaireResponse.item:item-I04.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    100. QuestionnaireResponse.item:item-I04.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short肢體攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    102. QuestionnaireResponse.item:item-I04.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    104. QuestionnaireResponse.item:item-I05
    Slice Nameitem-I05
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI05. 干擾行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    106. QuestionnaireResponse.item:item-I05.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    108. QuestionnaireResponse.item:item-I05.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI05
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    110. QuestionnaireResponse.item:item-I05.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value干擾行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    112. QuestionnaireResponse.item:item-I05.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    114. QuestionnaireResponse.item:item-I05.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    116. QuestionnaireResponse.item:item-I05.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short干擾行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. QuestionnaireResponse.item:item-I05.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    120. QuestionnaireResponse.item:item-I06
    Slice Nameitem-I06
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI06. 抗拒照護Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    122. QuestionnaireResponse.item:item-I06.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    124. QuestionnaireResponse.item:item-I06.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI06
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    126. QuestionnaireResponse.item:item-I06.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value抗拒照護
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    128. QuestionnaireResponse.item:item-I06.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    130. QuestionnaireResponse.item:item-I06.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    132. QuestionnaireResponse.item:item-I06.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short抗拒照護[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    134. QuestionnaireResponse.item:item-I06.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    136. QuestionnaireResponse.item:item-I07
    Slice Nameitem-I07
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI07. 妄想Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    138. QuestionnaireResponse.item:item-I07.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    140. QuestionnaireResponse.item:item-I07.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI07
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    142. QuestionnaireResponse.item:item-I07.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value妄想
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    144. QuestionnaireResponse.item:item-I07.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    146. QuestionnaireResponse.item:item-I07.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    148. QuestionnaireResponse.item:item-I07.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short妄想[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    150. QuestionnaireResponse.item:item-I07.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    152. QuestionnaireResponse.item:item-I08
    Slice Nameitem-I08
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI08. 幻覺Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    154. QuestionnaireResponse.item:item-I08.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    156. QuestionnaireResponse.item:item-I08.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI08
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    158. QuestionnaireResponse.item:item-I08.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value幻覺
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    160. QuestionnaireResponse.item:item-I08.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    162. QuestionnaireResponse.item:item-I08.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    164. QuestionnaireResponse.item:item-I08.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short幻覺[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    166. QuestionnaireResponse.item:item-I08.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    168. QuestionnaireResponse.item:item-I09
    Slice Nameitem-I09
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI09. 恐懼或焦慮Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    170. QuestionnaireResponse.item:item-I09.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    172. QuestionnaireResponse.item:item-I09.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI09
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    174. QuestionnaireResponse.item:item-I09.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value恐懼或焦慮
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    176. QuestionnaireResponse.item:item-I09.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    178. QuestionnaireResponse.item:item-I09.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    180. QuestionnaireResponse.item:item-I09.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short恐懼或焦慮[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    182. QuestionnaireResponse.item:item-I09.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    184. QuestionnaireResponse.item:item-I10
    Slice Nameitem-I10
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI10. 憂鬱及負性症狀Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    186. QuestionnaireResponse.item:item-I10.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    188. QuestionnaireResponse.item:item-I10.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI10
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    190. QuestionnaireResponse.item:item-I10.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value憂鬱及負性症狀
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    192. QuestionnaireResponse.item:item-I10.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    194. QuestionnaireResponse.item:item-I10.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    196. QuestionnaireResponse.item:item-I10.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short憂鬱及負性症狀[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    198. QuestionnaireResponse.item:item-I10.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    200. QuestionnaireResponse.item:item-I11
    Slice Nameitem-I11
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI11. 自傷行為及自殺(包含意念及行為)Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    202. QuestionnaireResponse.item:item-I11.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    204. QuestionnaireResponse.item:item-I11.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI11
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    206. QuestionnaireResponse.item:item-I11.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value自傷行為及自殺(包含意念及行為)
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    208. QuestionnaireResponse.item:item-I11.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    210. QuestionnaireResponse.item:item-I11.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    212. QuestionnaireResponse.item:item-I11.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short自傷行為及自殺(包含意念及行為)[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    214. QuestionnaireResponse.item:item-I11.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    216. QuestionnaireResponse.item:item-I12
    Slice Nameitem-I12
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI12. 重複行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    218. QuestionnaireResponse.item:item-I12.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    220. QuestionnaireResponse.item:item-I12.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI12
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    222. QuestionnaireResponse.item:item-I12.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value重複行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    224. QuestionnaireResponse.item:item-I12.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    226. QuestionnaireResponse.item:item-I12.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    228. QuestionnaireResponse.item:item-I12.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short重複行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    230. QuestionnaireResponse.item:item-I12.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    232. QuestionnaireResponse.item:item-I13
    Slice Nameitem-I13
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI13. 對物品的攻擊行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    234. QuestionnaireResponse.item:item-I13.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    236. QuestionnaireResponse.item:item-I13.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI13
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    238. QuestionnaireResponse.item:item-I13.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value對物品的攻擊行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    240. QuestionnaireResponse.item:item-I13.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    242. QuestionnaireResponse.item:item-I13.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    244. QuestionnaireResponse.item:item-I13.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short對物品的攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    246. QuestionnaireResponse.item:item-I13.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    248. QuestionnaireResponse.item:item-I14
    Slice Nameitem-I14
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    ShortI14. 其他不適當以及不潔行為Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    250. QuestionnaireResponse.item:item-I14.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    252. QuestionnaireResponse.item:item-I14.linkId
    Definition

    The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

    Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

    Pattern ValueI14
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    254. QuestionnaireResponse.item:item-I14.text
    Definition

    Text that is displayed above the contents of the group or as the text of the question being answered.

    Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Allows the questionnaire response to be read without access to the questionnaire.

    Pattern Value其他不適當以及不潔行為
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    256. QuestionnaireResponse.item:item-I14.answer
    Definition

    The respondent's answer(s) to the question.

    Short問題或量表項目的回覆The response(s) to the question
    Comments

    The value is nested because we cannot have a repeating structure that has variable type.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    258. QuestionnaireResponse.item:item-I14.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    260. QuestionnaireResponse.item:item-I14.answer.value[x]
    Definition

    The answer (or one of the answers) provided by the respondent to the question.

    Short其他不適當以及不潔行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]Single-valued answer to the question
    Comments

    More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

    Control10..1
    BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers
    (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

    Code indicating the response provided for a question.

    Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Ability to retain a single-valued answer to a question.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    262. QuestionnaireResponse.item:item-I14.item
    Definition

    Questions or sub-groups nested beneath a question or group.

    Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
    Control0..*
    TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Reports can consist of complex nested groups.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. QuestionnaireResponse
    2. QuestionnaireResponse.item
    Control14..14
    SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ linkId
    • 4. QuestionnaireResponse.item:item-I01
      Slice Nameitem-I01
      ShortI01. 遊走
      Control1..1
      Must Supporttrue
      6. QuestionnaireResponse.item:item-I01.linkId
      Pattern ValueI01
      8. QuestionnaireResponse.item:item-I01.text
      Control1..?
      Pattern Value遊走
      10. QuestionnaireResponse.item:item-I01.answer
      Control1..1
      12. QuestionnaireResponse.item:item-I01.answer.value[x]
      Short遊走[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      14. QuestionnaireResponse.item:item-I02
      Slice Nameitem-I02
      ShortI02. 日夜顛倒/作息混亂
      Control1..1
      Must Supporttrue
      16. QuestionnaireResponse.item:item-I02.linkId
      Pattern ValueI02
      18. QuestionnaireResponse.item:item-I02.text
      Control1..?
      Pattern Value日夜顛倒/作息混亂
      20. QuestionnaireResponse.item:item-I02.answer
      Control1..1
      22. QuestionnaireResponse.item:item-I02.answer.value[x]
      Short日夜顛倒/作息混亂[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      24. QuestionnaireResponse.item:item-I03
      Slice Nameitem-I03
      ShortI03. 語言攻擊行為
      Control1..1
      Must Supporttrue
      26. QuestionnaireResponse.item:item-I03.linkId
      Pattern ValueI03
      28. QuestionnaireResponse.item:item-I03.text
      Control1..?
      Pattern Value語言攻擊行為
      30. QuestionnaireResponse.item:item-I03.answer
      Control1..1
      32. QuestionnaireResponse.item:item-I03.answer.value[x]
      Short語言攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      34. QuestionnaireResponse.item:item-I04
      Slice Nameitem-I04
      ShortI04. 肢體攻擊行為
      Control1..1
      Must Supporttrue
      36. QuestionnaireResponse.item:item-I04.linkId
      Pattern ValueI04
      38. QuestionnaireResponse.item:item-I04.text
      Control1..?
      Pattern Value肢體攻擊行為
      40. QuestionnaireResponse.item:item-I04.answer
      Control1..1
      42. QuestionnaireResponse.item:item-I04.answer.value[x]
      Short肢體攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      44. QuestionnaireResponse.item:item-I05
      Slice Nameitem-I05
      ShortI05. 干擾行為
      Control1..1
      Must Supporttrue
      46. QuestionnaireResponse.item:item-I05.linkId
      Pattern ValueI05
      48. QuestionnaireResponse.item:item-I05.text
      Control1..?
      Pattern Value干擾行為
      50. QuestionnaireResponse.item:item-I05.answer
      Control1..1
      52. QuestionnaireResponse.item:item-I05.answer.value[x]
      Short干擾行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      54. QuestionnaireResponse.item:item-I06
      Slice Nameitem-I06
      ShortI06. 抗拒照護
      Control1..1
      Must Supporttrue
      56. QuestionnaireResponse.item:item-I06.linkId
      Pattern ValueI06
      58. QuestionnaireResponse.item:item-I06.text
      Control1..?
      Pattern Value抗拒照護
      60. QuestionnaireResponse.item:item-I06.answer
      Control1..1
      62. QuestionnaireResponse.item:item-I06.answer.value[x]
      Short抗拒照護[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      64. QuestionnaireResponse.item:item-I07
      Slice Nameitem-I07
      ShortI07. 妄想
      Control1..1
      Must Supporttrue
      66. QuestionnaireResponse.item:item-I07.linkId
      Pattern ValueI07
      68. QuestionnaireResponse.item:item-I07.text
      Control1..?
      Pattern Value妄想
      70. QuestionnaireResponse.item:item-I07.answer
      Control1..1
      72. QuestionnaireResponse.item:item-I07.answer.value[x]
      Short妄想[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      74. QuestionnaireResponse.item:item-I08
      Slice Nameitem-I08
      ShortI08. 幻覺
      Control1..1
      Must Supporttrue
      76. QuestionnaireResponse.item:item-I08.linkId
      Pattern ValueI08
      78. QuestionnaireResponse.item:item-I08.text
      Control1..?
      Pattern Value幻覺
      80. QuestionnaireResponse.item:item-I08.answer
      Control1..1
      82. QuestionnaireResponse.item:item-I08.answer.value[x]
      Short幻覺[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      84. QuestionnaireResponse.item:item-I09
      Slice Nameitem-I09
      ShortI09. 恐懼或焦慮
      Control1..1
      Must Supporttrue
      86. QuestionnaireResponse.item:item-I09.linkId
      Pattern ValueI09
      88. QuestionnaireResponse.item:item-I09.text
      Control1..?
      Pattern Value恐懼或焦慮
      90. QuestionnaireResponse.item:item-I09.answer
      Control1..1
      92. QuestionnaireResponse.item:item-I09.answer.value[x]
      Short恐懼或焦慮[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      94. QuestionnaireResponse.item:item-I10
      Slice Nameitem-I10
      ShortI10. 憂鬱及負性症狀
      Control1..1
      Must Supporttrue
      96. QuestionnaireResponse.item:item-I10.linkId
      Pattern ValueI10
      98. QuestionnaireResponse.item:item-I10.text
      Control1..?
      Pattern Value憂鬱及負性症狀
      100. QuestionnaireResponse.item:item-I10.answer
      Control1..1
      102. QuestionnaireResponse.item:item-I10.answer.value[x]
      Short憂鬱及負性症狀[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      104. QuestionnaireResponse.item:item-I11
      Slice Nameitem-I11
      ShortI11. 自傷行為及自殺(包含意念及行為)
      Control1..1
      Must Supporttrue
      106. QuestionnaireResponse.item:item-I11.linkId
      Pattern ValueI11
      108. QuestionnaireResponse.item:item-I11.text
      Control1..?
      Pattern Value自傷行為及自殺(包含意念及行為)
      110. QuestionnaireResponse.item:item-I11.answer
      Control1..1
      112. QuestionnaireResponse.item:item-I11.answer.value[x]
      Short自傷行為及自殺(包含意念及行為)[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      114. QuestionnaireResponse.item:item-I12
      Slice Nameitem-I12
      ShortI12. 重複行為
      Control1..1
      Must Supporttrue
      116. QuestionnaireResponse.item:item-I12.linkId
      Pattern ValueI12
      118. QuestionnaireResponse.item:item-I12.text
      Control1..?
      Pattern Value重複行為
      120. QuestionnaireResponse.item:item-I12.answer
      Control1..1
      122. QuestionnaireResponse.item:item-I12.answer.value[x]
      Short重複行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      124. QuestionnaireResponse.item:item-I13
      Slice Nameitem-I13
      ShortI13. 對物品的攻擊行為
      Control1..1
      Must Supporttrue
      126. QuestionnaireResponse.item:item-I13.linkId
      Pattern ValueI13
      128. QuestionnaireResponse.item:item-I13.text
      Control1..?
      Pattern Value對物品的攻擊行為
      130. QuestionnaireResponse.item:item-I13.answer
      Control1..1
      132. QuestionnaireResponse.item:item-I13.answer.value[x]
      Short對物品的攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      134. QuestionnaireResponse.item:item-I14
      Slice Nameitem-I14
      ShortI14. 其他不適當以及不潔行為
      Control1..1
      Must Supporttrue
      136. QuestionnaireResponse.item:item-I14.linkId
      Pattern ValueI14
      138. QuestionnaireResponse.item:item-I14.text
      Control1..?
      Pattern Value其他不適當以及不潔行為
      140. QuestionnaireResponse.item:item-I14.answer
      Control1..1
      142. QuestionnaireResponse.item:item-I14.answer.value[x]
      Short其他不適當以及不潔行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
      Control1..?
      Typestring
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

      Guidance on how to interpret the contents of this table can be foundhere

      0. QuestionnaireResponse
      Definition

      A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.

      ShortA structured set of questions and their answers
      Comments

      The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Alternate NamesForm, QuestionnaireAnswers
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. QuestionnaireResponse.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. QuestionnaireResponse.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. QuestionnaireResponse.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. QuestionnaireResponse.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. QuestionnaireResponse.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. QuestionnaireResponse.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. QuestionnaireResponse.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. QuestionnaireResponse.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. QuestionnaireResponse.identifier
      Definition

      A business identifier assigned to a particular completed (or partially completed) questionnaire.

      ShortUnique id for this set of answers
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Used for tracking, registration and other business purposes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. QuestionnaireResponse.basedOn
      Definition

      The order, proposal or plan that is fulfilled in whole or in part by this QuestionnaireResponse. For example, a ServiceRequest seeking an intake assessment or a decision support recommendation to assess for post-partum depression.

      ShortRequest fulfilled by this QuestionnaireResponse
      Control0..*
      TypeReference(CarePlan, ServiceRequest)
      Is Modifierfalse
      Summarytrue
      Requirements

      Supports traceability of responsibility for the action and allows linkage of an action to the recommendations acted upon.

      Alternate Namesorder
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. QuestionnaireResponse.partOf
      Definition

      A procedure or observation that this questionnaire was performed as part of the execution of. For example, the surgery a checklist was executed as part of.

      ShortPart of this action
      Comments

      Composition of questionnaire responses will be handled by the parent questionnaire having answers that reference the child questionnaire. For relationships to referrals, and other types of requests, use basedOn.

      Control0..*
      TypeReference(Observation, Procedure)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. QuestionnaireResponse.questionnaire
      Definition

      The Questionnaire that defines and organizes the questions for which answers are being provided.

      Short這個問卷回覆所回答的問卷。[應填入問卷的 URL]
      Comments

      If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).

      Control0..1
      Typecanonical(長期照顧-問卷)
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.

      Alternate NamesForm
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. QuestionnaireResponse.status
      Definition

      The position of the questionnaire response within its overall lifecycle.

      Short問卷回覆的狀態。[應填入 in-progress / completed / amended / entered-in-error / stopped]
      Comments

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from QuestionnaireResponseStatus
      (required to http://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1)

      Lifecycle status of the questionnaire response.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. QuestionnaireResponse.subject
      Definition

      The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information.

      Short問卷回覆的適用主體
      Comments

      If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.

      Control1..1
      TypeReference(長期照顧-住民基本資料)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows linking the answers to the individual the answers describe. May also affect access control.

      Alternate NamesPatient, Focus
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. QuestionnaireResponse.subject.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      32. QuestionnaireResponse.subject.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on QuestionnaireResponse.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 34. QuestionnaireResponse.subject.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        Short問卷回覆的適用主體。[應輸入 Patient Resource ID]
        Comments

        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control1..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. QuestionnaireResponse.subject.type
        Definition

        The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

        The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

        ShortType the reference refers to (e.g. "Patient")
        Comments

        This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from ResourceType
        (extensible to http://hl7.org/fhir/ValueSet/resource-types)

        Aa resource (or, for logical models, the URI of the logical model).

        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. QuestionnaireResponse.subject.identifier
        Definition

        An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

        ShortLogical reference, when literal reference is not known
        Comments

        When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

        When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

        Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

        Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. QuestionnaireResponse.subject.display
        Definition

        Plain text narrative that identifies the resource in addition to the resource reference.

        ShortText alternative for the resource
        Comments

        This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. QuestionnaireResponse.encounter
        Definition

        The Encounter during which this questionnaire response was created or to which the creation of this record is tightly associated.

        ShortEncounter created as part of
        Comments

        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. A questionnaire that was initiated during an encounter but not fully completed during the encounter would still generally be associated with the encounter.

        Control0..1
        TypeReference(Encounter)
        Is Modifierfalse
        Summarytrue
        Requirements

        Provides context for the information that was captured. May also affect access control.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. QuestionnaireResponse.authored
        Definition

        The date and/or time that this set of answers were last changed.

        Short問卷回覆的填寫日期
        Comments

        May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.

        This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible.

        Control1..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.

        Alternate NamesDate Created, Date published, Date Issued, Date updated
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. QuestionnaireResponse.author
        Definition

        Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.

        Short問卷回覆的填寫者
        Comments

        Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated.

        Control0..1
        TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色)
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Requirements

        Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.

        Alternate NamesLaboratory, Service, Practitioner, Department, Company, Performer
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. QuestionnaireResponse.author.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        50. QuestionnaireResponse.author.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on QuestionnaireResponse.author.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 52. QuestionnaireResponse.author.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          Short問卷回覆的填寫者。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. QuestionnaireResponse.author.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. QuestionnaireResponse.author.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. QuestionnaireResponse.author.display
          Definition

          Plain text narrative that identifies the resource in addition to the resource reference.

          ShortText alternative for the resource
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. QuestionnaireResponse.source
          Definition

          The person who answered the questions about the subject.

          Short誰提供了問卷回覆的資料,意即誰回答了這份問卷
          Comments

          If not specified, no inference can be made about who provided the data.

          Control0..1
          TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summarytrue
          Requirements

          When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. QuestionnaireResponse.source.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          64. QuestionnaireResponse.source.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on QuestionnaireResponse.source.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 66. QuestionnaireResponse.source.reference
            Definition

            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

            Short誰提供了問卷回覆的資料。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]
            Comments

            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

            Control1..1
            This element is affected by the following invariants: ref-1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. QuestionnaireResponse.source.type
            Definition

            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

            ShortType the reference refers to (e.g. "Patient")
            Comments

            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ResourceType
            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

            Aa resource (or, for logical models, the URI of the logical model).

            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. QuestionnaireResponse.source.identifier
            Definition

            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

            ShortLogical reference, when literal reference is not known
            Comments

            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. QuestionnaireResponse.source.display
            Definition

            Plain text narrative that identifies the resource in addition to the resource reference.

            ShortText alternative for the resource
            Comments

            This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. QuestionnaireResponse.item
            Definition

            A group or question item from the original questionnaire for which answers are provided.

            Short問卷回覆的內容
            Comments

            Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

            Control14..14
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
            SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ linkId
            • 76. QuestionnaireResponse.item.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              78. QuestionnaireResponse.item.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              80. QuestionnaireResponse.item.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              82. QuestionnaireResponse.item.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. QuestionnaireResponse.item.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. QuestionnaireResponse.item.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. QuestionnaireResponse.item.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. QuestionnaireResponse.item.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              92. QuestionnaireResponse.item.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              94. QuestionnaireResponse.item.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              96. QuestionnaireResponse.item.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short回覆的內容。[應填入回覆的內容]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control0..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. QuestionnaireResponse.item.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. QuestionnaireResponse.item.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. QuestionnaireResponse.item:item-I01
              Slice Nameitem-I01
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI01. 遊走
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              104. QuestionnaireResponse.item:item-I01.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              106. QuestionnaireResponse.item:item-I01.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              108. QuestionnaireResponse.item:item-I01.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              110. QuestionnaireResponse.item:item-I01.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI01
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              112. QuestionnaireResponse.item:item-I01.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              114. QuestionnaireResponse.item:item-I01.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value遊走
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              116. QuestionnaireResponse.item:item-I01.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              118. QuestionnaireResponse.item:item-I01.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              120. QuestionnaireResponse.item:item-I01.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              122. QuestionnaireResponse.item:item-I01.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              124. QuestionnaireResponse.item:item-I01.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short遊走[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              126. QuestionnaireResponse.item:item-I01.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              128. QuestionnaireResponse.item:item-I01.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              130. QuestionnaireResponse.item:item-I02
              Slice Nameitem-I02
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI02. 日夜顛倒/作息混亂
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              132. QuestionnaireResponse.item:item-I02.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              134. QuestionnaireResponse.item:item-I02.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              136. QuestionnaireResponse.item:item-I02.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              138. QuestionnaireResponse.item:item-I02.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI02
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              140. QuestionnaireResponse.item:item-I02.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              142. QuestionnaireResponse.item:item-I02.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value日夜顛倒/作息混亂
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              144. QuestionnaireResponse.item:item-I02.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              146. QuestionnaireResponse.item:item-I02.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              148. QuestionnaireResponse.item:item-I02.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              150. QuestionnaireResponse.item:item-I02.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              152. QuestionnaireResponse.item:item-I02.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short日夜顛倒/作息混亂[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              154. QuestionnaireResponse.item:item-I02.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              156. QuestionnaireResponse.item:item-I02.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              158. QuestionnaireResponse.item:item-I03
              Slice Nameitem-I03
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI03. 語言攻擊行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              160. QuestionnaireResponse.item:item-I03.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              162. QuestionnaireResponse.item:item-I03.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              164. QuestionnaireResponse.item:item-I03.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              166. QuestionnaireResponse.item:item-I03.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI03
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              168. QuestionnaireResponse.item:item-I03.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              170. QuestionnaireResponse.item:item-I03.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value語言攻擊行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              172. QuestionnaireResponse.item:item-I03.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              174. QuestionnaireResponse.item:item-I03.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              176. QuestionnaireResponse.item:item-I03.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              178. QuestionnaireResponse.item:item-I03.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              180. QuestionnaireResponse.item:item-I03.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short語言攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              182. QuestionnaireResponse.item:item-I03.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              184. QuestionnaireResponse.item:item-I03.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              186. QuestionnaireResponse.item:item-I04
              Slice Nameitem-I04
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI04. 肢體攻擊行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              188. QuestionnaireResponse.item:item-I04.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              190. QuestionnaireResponse.item:item-I04.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              192. QuestionnaireResponse.item:item-I04.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              194. QuestionnaireResponse.item:item-I04.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI04
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              196. QuestionnaireResponse.item:item-I04.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              198. QuestionnaireResponse.item:item-I04.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value肢體攻擊行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              200. QuestionnaireResponse.item:item-I04.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              202. QuestionnaireResponse.item:item-I04.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              204. QuestionnaireResponse.item:item-I04.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              206. QuestionnaireResponse.item:item-I04.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              208. QuestionnaireResponse.item:item-I04.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short肢體攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              210. QuestionnaireResponse.item:item-I04.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              212. QuestionnaireResponse.item:item-I04.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              214. QuestionnaireResponse.item:item-I05
              Slice Nameitem-I05
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI05. 干擾行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              216. QuestionnaireResponse.item:item-I05.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              218. QuestionnaireResponse.item:item-I05.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              220. QuestionnaireResponse.item:item-I05.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              222. QuestionnaireResponse.item:item-I05.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI05
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              224. QuestionnaireResponse.item:item-I05.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              226. QuestionnaireResponse.item:item-I05.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value干擾行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              228. QuestionnaireResponse.item:item-I05.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              230. QuestionnaireResponse.item:item-I05.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              232. QuestionnaireResponse.item:item-I05.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              234. QuestionnaireResponse.item:item-I05.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              236. QuestionnaireResponse.item:item-I05.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short干擾行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              238. QuestionnaireResponse.item:item-I05.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              240. QuestionnaireResponse.item:item-I05.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              242. QuestionnaireResponse.item:item-I06
              Slice Nameitem-I06
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI06. 抗拒照護
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              244. QuestionnaireResponse.item:item-I06.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              246. QuestionnaireResponse.item:item-I06.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              248. QuestionnaireResponse.item:item-I06.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              250. QuestionnaireResponse.item:item-I06.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI06
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              252. QuestionnaireResponse.item:item-I06.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              254. QuestionnaireResponse.item:item-I06.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value抗拒照護
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              256. QuestionnaireResponse.item:item-I06.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              258. QuestionnaireResponse.item:item-I06.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              260. QuestionnaireResponse.item:item-I06.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              262. QuestionnaireResponse.item:item-I06.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              264. QuestionnaireResponse.item:item-I06.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short抗拒照護[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              266. QuestionnaireResponse.item:item-I06.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              268. QuestionnaireResponse.item:item-I06.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              270. QuestionnaireResponse.item:item-I07
              Slice Nameitem-I07
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI07. 妄想
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              272. QuestionnaireResponse.item:item-I07.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              274. QuestionnaireResponse.item:item-I07.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              276. QuestionnaireResponse.item:item-I07.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              278. QuestionnaireResponse.item:item-I07.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI07
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              280. QuestionnaireResponse.item:item-I07.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              282. QuestionnaireResponse.item:item-I07.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value妄想
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              284. QuestionnaireResponse.item:item-I07.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              286. QuestionnaireResponse.item:item-I07.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              288. QuestionnaireResponse.item:item-I07.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              290. QuestionnaireResponse.item:item-I07.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              292. QuestionnaireResponse.item:item-I07.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short妄想[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              294. QuestionnaireResponse.item:item-I07.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              296. QuestionnaireResponse.item:item-I07.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              298. QuestionnaireResponse.item:item-I08
              Slice Nameitem-I08
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI08. 幻覺
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              300. QuestionnaireResponse.item:item-I08.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              302. QuestionnaireResponse.item:item-I08.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              304. QuestionnaireResponse.item:item-I08.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              306. QuestionnaireResponse.item:item-I08.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI08
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              308. QuestionnaireResponse.item:item-I08.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              310. QuestionnaireResponse.item:item-I08.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value幻覺
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              312. QuestionnaireResponse.item:item-I08.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              314. QuestionnaireResponse.item:item-I08.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              316. QuestionnaireResponse.item:item-I08.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              318. QuestionnaireResponse.item:item-I08.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              320. QuestionnaireResponse.item:item-I08.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short幻覺[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              322. QuestionnaireResponse.item:item-I08.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              324. QuestionnaireResponse.item:item-I08.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              326. QuestionnaireResponse.item:item-I09
              Slice Nameitem-I09
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI09. 恐懼或焦慮
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              328. QuestionnaireResponse.item:item-I09.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              330. QuestionnaireResponse.item:item-I09.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              332. QuestionnaireResponse.item:item-I09.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              334. QuestionnaireResponse.item:item-I09.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI09
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              336. QuestionnaireResponse.item:item-I09.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              338. QuestionnaireResponse.item:item-I09.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value恐懼或焦慮
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              340. QuestionnaireResponse.item:item-I09.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              342. QuestionnaireResponse.item:item-I09.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              344. QuestionnaireResponse.item:item-I09.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              346. QuestionnaireResponse.item:item-I09.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              348. QuestionnaireResponse.item:item-I09.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short恐懼或焦慮[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              350. QuestionnaireResponse.item:item-I09.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              352. QuestionnaireResponse.item:item-I09.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              354. QuestionnaireResponse.item:item-I10
              Slice Nameitem-I10
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI10. 憂鬱及負性症狀
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              356. QuestionnaireResponse.item:item-I10.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              358. QuestionnaireResponse.item:item-I10.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              360. QuestionnaireResponse.item:item-I10.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              362. QuestionnaireResponse.item:item-I10.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI10
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              364. QuestionnaireResponse.item:item-I10.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              366. QuestionnaireResponse.item:item-I10.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value憂鬱及負性症狀
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              368. QuestionnaireResponse.item:item-I10.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              370. QuestionnaireResponse.item:item-I10.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              372. QuestionnaireResponse.item:item-I10.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              374. QuestionnaireResponse.item:item-I10.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              376. QuestionnaireResponse.item:item-I10.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short憂鬱及負性症狀[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              378. QuestionnaireResponse.item:item-I10.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              380. QuestionnaireResponse.item:item-I10.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              382. QuestionnaireResponse.item:item-I11
              Slice Nameitem-I11
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI11. 自傷行為及自殺(包含意念及行為)
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              384. QuestionnaireResponse.item:item-I11.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              386. QuestionnaireResponse.item:item-I11.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              388. QuestionnaireResponse.item:item-I11.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              390. QuestionnaireResponse.item:item-I11.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI11
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              392. QuestionnaireResponse.item:item-I11.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              394. QuestionnaireResponse.item:item-I11.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value自傷行為及自殺(包含意念及行為)
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              396. QuestionnaireResponse.item:item-I11.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              398. QuestionnaireResponse.item:item-I11.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              400. QuestionnaireResponse.item:item-I11.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              402. QuestionnaireResponse.item:item-I11.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              404. QuestionnaireResponse.item:item-I11.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short自傷行為及自殺(包含意念及行為)[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              406. QuestionnaireResponse.item:item-I11.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              408. QuestionnaireResponse.item:item-I11.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              410. QuestionnaireResponse.item:item-I12
              Slice Nameitem-I12
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI12. 重複行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              412. QuestionnaireResponse.item:item-I12.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              414. QuestionnaireResponse.item:item-I12.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              416. QuestionnaireResponse.item:item-I12.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              418. QuestionnaireResponse.item:item-I12.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI12
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              420. QuestionnaireResponse.item:item-I12.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              422. QuestionnaireResponse.item:item-I12.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value重複行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              424. QuestionnaireResponse.item:item-I12.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              426. QuestionnaireResponse.item:item-I12.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              428. QuestionnaireResponse.item:item-I12.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              430. QuestionnaireResponse.item:item-I12.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              432. QuestionnaireResponse.item:item-I12.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short重複行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              434. QuestionnaireResponse.item:item-I12.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              436. QuestionnaireResponse.item:item-I12.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              438. QuestionnaireResponse.item:item-I13
              Slice Nameitem-I13
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI13. 對物品的攻擊行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              440. QuestionnaireResponse.item:item-I13.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              442. QuestionnaireResponse.item:item-I13.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              444. QuestionnaireResponse.item:item-I13.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              446. QuestionnaireResponse.item:item-I13.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI13
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              448. QuestionnaireResponse.item:item-I13.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              450. QuestionnaireResponse.item:item-I13.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value對物品的攻擊行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              452. QuestionnaireResponse.item:item-I13.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              454. QuestionnaireResponse.item:item-I13.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              456. QuestionnaireResponse.item:item-I13.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              458. QuestionnaireResponse.item:item-I13.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              460. QuestionnaireResponse.item:item-I13.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short對物品的攻擊行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              462. QuestionnaireResponse.item:item-I13.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              464. QuestionnaireResponse.item:item-I13.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              466. QuestionnaireResponse.item:item-I14
              Slice Nameitem-I14
              Definition

              A group or question item from the original questionnaire for which answers are provided.

              ShortI14. 其他不適當以及不潔行為
              Comments

              Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
              468. QuestionnaireResponse.item:item-I14.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              470. QuestionnaireResponse.item:item-I14.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              472. QuestionnaireResponse.item:item-I14.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              474. QuestionnaireResponse.item:item-I14.linkId
              Definition

              The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

              Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

              Pattern ValueI14
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              476. QuestionnaireResponse.item:item-I14.definition
              Definition

              A reference to an ElementDefinition that provides the details for the item.

              ShortElementDefinition - details for the item
              Comments

              The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

              There is no need for this element if the item pointed to by the linkId has a definition listed.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              478. QuestionnaireResponse.item:item-I14.text
              Definition

              Text that is displayed above the contents of the group or as the text of the question being answered.

              Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Allows the questionnaire response to be read without access to the questionnaire.

              Pattern Value其他不適當以及不潔行為
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              480. QuestionnaireResponse.item:item-I14.answer
              Definition

              The respondent's answer(s) to the question.

              Short問題或量表項目的回覆
              Comments

              The value is nested because we cannot have a repeating structure that has variable type.

              Control1..1
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              482. QuestionnaireResponse.item:item-I14.answer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              484. QuestionnaireResponse.item:item-I14.answer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              486. QuestionnaireResponse.item:item-I14.answer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              488. QuestionnaireResponse.item:item-I14.answer.value[x]
              Definition

              The answer (or one of the answers) provided by the respondent to the question.

              Short其他不適當以及不潔行為[應填入以下字串之一:過去三個月內從未發生 | 過去三個月內有發生,但過去一週內從未發生 | 過去三個月內有發生,且過去一週內出現 1-3 天 | 過去三個月內有發生,且過去一週內出現 4-7 天]
              Comments

              More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

              Control1..1
              BindingFor example codes, see QuestionnaireAnswerCodes
              (example to http://hl7.org/fhir/ValueSet/questionnaire-answers)

              Code indicating the response provided for a question.

              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Requirements

              Ability to retain a single-valued answer to a question.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              490. QuestionnaireResponse.item:item-I14.answer.item
              Definition

              Nested groups and/or questions found within this particular answer.

              ShortNested groups and questions
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Summaryfalse
              Requirements

              It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              492. QuestionnaireResponse.item:item-I14.item
              Definition

              Questions or sub-groups nested beneath a question or group.

              Short問卷的問題或量表項目(用於巢狀問卷)
              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              Reports can consist of complex nested groups.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))