臺灣長期照顧實作指引(TW LTC IG)
1.1.0 - STU 1.1.0

臺灣長期照顧實作指引(TW LTC IG) - Local Development build (v1.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: HNCaseDescResponse - Detailed Descriptions

Draft as of 2026-09-29

Definitions for the HNCaseDescResponse resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. QuestionnaireResponse
Definition

A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.

ShortA structured set of questions and their answers
Comments

The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesForm, QuestionnaireAnswers
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
hn-casedesc-1: 共照成員職稱選擇其他時應填寫補充說明。 (item.where(linkId='Title').all((item.where(linkId='Title.Value').answer.value.ofType(Coding).where(code='cd2909f1647e7').exists()) implies item.where(linkId='Title.Other').answer.value.exists()))
hn-casedesc-2: 照護結束時間不可早於開始時間。 (item.where(linkId='Time2').answer.value.single() >= item.where(linkId='Time').answer.value.single())
2. QuestionnaireResponse.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. QuestionnaireResponse.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on QuestionnaireResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. QuestionnaireResponse.extension:episode
    Slice Nameepisode
    Definition

    參照此次收案的 EpisodeOfCare。以機構、個案身分證字號及收案日期區分不同次收案。

    Short居家護理-收案關聯
    Control1..1
    This element is affected by the following invariants: ele-1
    TypeExtension(居家護理-收案關聯) (Extension Type: Reference(居家護理-收案歷程))
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. QuestionnaireResponse.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. QuestionnaireResponse.questionnaire
    Definition

    The Questionnaire that defines and organizes the questions for which answers are being provided.

    Short這個問卷回覆所回答的問卷。[應填入問卷的 URL]Form being answered
    Comments

    If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).

    Control10..1
    Typecanonical(長期照顧-問卷, Questionnaire)
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.

    Alternate NamesForm
    Pattern Valuehttp://ltc-ig.fhir.tw/Questionnaire/hn-casedesc
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. QuestionnaireResponse.status
    Definition

    The position of the questionnaire response within its overall lifecycle.

    Short問卷回覆的狀態。[應填入 in-progress / completed / amended / entered-in-error / stopped]in-progress | completed | amended | entered-in-error | stopped
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from QuestionnaireResponseStatushttp://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1)

    Lifecycle status of the questionnaire response.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. QuestionnaireResponse.subject
    Definition

    The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information.

    Short問卷回覆的適用主體The subject of the questions
    Comments

    If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.

    Control10..1
    TypeReference(長期照顧-住民基本資料, Resource)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows linking the answers to the individual the answers describe. May also affect access control.

    Alternate NamesPatient, Focus
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. QuestionnaireResponse.subject.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    Short問卷回覆的適用主體。[應輸入 Patient Resource ID]Literal reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. QuestionnaireResponse.authored
    Definition

    The date and/or time that this set of answers were last changed.

    Short問卷回覆的填寫日期Date the answers were gathered
    Comments

    May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.

    This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible.

    Control10..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.

    Alternate NamesDate Created, Date published, Date Issued, Date updated
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. QuestionnaireResponse.author
    Definition

    Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.

    Short問卷回覆的填寫者Person who received and recorded the answers
    Comments

    Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated.

    Control0..1
    TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色, Device, Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.

    Alternate NamesLaboratory, Service, Practitioner, Department, Company, Performer
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. QuestionnaireResponse.author.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    Short問卷回覆的填寫者。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]Literal reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. QuestionnaireResponse.source
    Definition

    The person who answered the questions about the subject.

    Short誰提供了問卷回覆的資料,意即誰回答了這份問卷The person who answered the questions
    Comments

    If not specified, no inference can be made about who provided the data.

    Control0..1
    TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色, Patient, Practitioner, PractitionerRole, RelatedPerson)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Requirements

    When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. QuestionnaireResponse.source.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    Short誰提供了問卷回覆的資料。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]Literal reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. QuestionnaireResponse.item
    Definition

    A group or question item from the original questionnaire for which answers are provided.

    Short問卷回覆的內容Groups and questions
    Comments

    Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

    Control80..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
    SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • value @ linkId
    • 30. QuestionnaireResponse.item.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. QuestionnaireResponse.item.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. QuestionnaireResponse.item.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. QuestionnaireResponse.item.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. QuestionnaireResponse.item.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      40. QuestionnaireResponse.item.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control0..1
      BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
      (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

      Code indicating the response provided for a question.

      TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. QuestionnaireResponse.item.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. QuestionnaireResponse.item:CaseID
      Slice NameCaseID
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short個案身分證字號Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      46. QuestionnaireResponse.item:CaseID.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      48. QuestionnaireResponse.item:CaseID.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueCaseID
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. QuestionnaireResponse.item:CaseID.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. QuestionnaireResponse.item:CaseID.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. QuestionnaireResponse.item:CaseID.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      56. QuestionnaireResponse.item:CaseID.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
      (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

      Code indicating the response provided for a question.

      Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Max Length:10
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. QuestionnaireResponse.item:CaseID.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. QuestionnaireResponse.item:EndDate
      Slice NameEndDate
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short收案日期Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      62. QuestionnaireResponse.item:EndDate.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      64. QuestionnaireResponse.item:EndDate.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueEndDate
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. QuestionnaireResponse.item:EndDate.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. QuestionnaireResponse.item:EndDate.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. QuestionnaireResponse.item:EndDate.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      72. QuestionnaireResponse.item:EndDate.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      Typedate, dateTime, boolean, string, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. QuestionnaireResponse.item:EndDate.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. QuestionnaireResponse.item:Date
      Slice NameDate
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short照護日期Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      78. QuestionnaireResponse.item:Date.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      80. QuestionnaireResponse.item:Date.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueDate
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. QuestionnaireResponse.item:Date.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. QuestionnaireResponse.item:Date.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. QuestionnaireResponse.item:Date.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      88. QuestionnaireResponse.item:Date.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      Typedate, dateTime, boolean, string, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. QuestionnaireResponse.item:Date.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. QuestionnaireResponse.item:Time
      Slice NameTime
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short開始時間Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      94. QuestionnaireResponse.item:Time.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      96. QuestionnaireResponse.item:Time.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueTime
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. QuestionnaireResponse.item:Time.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. QuestionnaireResponse.item:Time.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      102. QuestionnaireResponse.item:Time.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      104. QuestionnaireResponse.item:Time.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      Typetime, date, dateTime, boolean, string, Coding, Reference(Resource), Quantity, Attachment, integer, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      106. QuestionnaireResponse.item:Time.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      108. QuestionnaireResponse.item:Time2
      Slice NameTime2
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short結束時間Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      110. QuestionnaireResponse.item:Time2.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      112. QuestionnaireResponse.item:Time2.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueTime2
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      114. QuestionnaireResponse.item:Time2.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. QuestionnaireResponse.item:Time2.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      118. QuestionnaireResponse.item:Time2.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      120. QuestionnaireResponse.item:Time2.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      Typetime, date, dateTime, boolean, string, Coding, Reference(Resource), Quantity, Attachment, integer, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      122. QuestionnaireResponse.item:Time2.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      124. QuestionnaireResponse.item:MedicalName
      Slice NameMedicalName
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short共照成員姓名Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      126. QuestionnaireResponse.item:MedicalName.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      128. QuestionnaireResponse.item:MedicalName.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueMedicalName
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      130. QuestionnaireResponse.item:MedicalName.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      132. QuestionnaireResponse.item:MedicalName.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      134. QuestionnaireResponse.item:MedicalName.answer.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      136. QuestionnaireResponse.item:MedicalName.answer.value[x]
      Definition

      The answer (or one of the answers) provided by the respondent to the question.

      Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
      Comments

      More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

      Control10..1
      BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
      (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

      Code indicating the response provided for a question.

      Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Ability to retain a single-valued answer to a question.

      Max Length:50
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      138. QuestionnaireResponse.item:MedicalName.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control0..0*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      140. QuestionnaireResponse.item:Title
      Slice NameTitle
      Definition

      A group or question item from the original questionnaire for which answers are provided.

      Short共照成員職稱Groups and questions
      Comments

      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
      142. QuestionnaireResponse.item:Title.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      144. QuestionnaireResponse.item:Title.linkId
      Definition

      The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

      Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
      Control1..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

      Pattern ValueTitle
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      146. QuestionnaireResponse.item:Title.text
      Definition

      Text that is displayed above the contents of the group or as the text of the question being answered.

      Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Allows the questionnaire response to be read without access to the questionnaire.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      148. QuestionnaireResponse.item:Title.answer
      Definition

      The respondent's answer(s) to the question.

      Short問題或量表項目的回覆The response(s) to the question
      Comments

      The value is nested because we cannot have a repeating structure that has variable type.

      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      152. QuestionnaireResponse.item:Title.item
      Definition

      Questions or sub-groups nested beneath a question or group.

      Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
      Control10..*
      TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Reports can consist of complex nested groups.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on QuestionnaireResponse.item.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • value @ linkId
      • 154. QuestionnaireResponse.item:Title.item.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        156. QuestionnaireResponse.item:Title.item.linkId
        Definition

        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        158. QuestionnaireResponse.item:Title.item.text
        Definition

        Text that is displayed above the contents of the group or as the text of the question being answered.

        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        Allows the questionnaire response to be read without access to the questionnaire.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        160. QuestionnaireResponse.item:Title.item.answer
        Definition

        The respondent's answer(s) to the question.

        Short問題或量表項目的回覆The response(s) to the question
        Comments

        The value is nested because we cannot have a repeating structure that has variable type.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        162. QuestionnaireResponse.item:Title.item.answer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        164. QuestionnaireResponse.item:Title.item.answer.value[x]
        Definition

        The answer (or one of the answers) provided by the respondent to the question.

        Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
        Comments

        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

        Control0..1
        BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

        Code indicating the response provided for a question.

        TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summaryfalse
        Requirements

        Ability to retain a single-valued answer to a question.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        166. QuestionnaireResponse.item:Title.item.item
        Definition

        Questions or sub-groups nested beneath a question or group.

        Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        168. QuestionnaireResponse.item:Title.item:Value
        Slice NameValue
        Definition

        Questions or sub-groups nested beneath a question or group.

        Short選項Nested questionnaire response items
        Control10..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        170. QuestionnaireResponse.item:Title.item:Value.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.


        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        172. QuestionnaireResponse.item:Title.item:Value.linkId
        Definition

        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

        ShortPointer to specific item from Questionnaire
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

        Pattern ValueTitle.Value
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        174. QuestionnaireResponse.item:Title.item:Value.answer
        Definition

        The respondent's answer(s) to the question.

        ShortThe response(s) to the question
        Comments

        The value is nested because we cannot have a repeating structure that has variable type.

        Control10..1*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        176. QuestionnaireResponse.item:Title.item:Value.answer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.


        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        178. QuestionnaireResponse.item:Title.item:Value.answer.value[x]
        Definition

        The answer (or one of the answers) provided by the respondent to the question.

        ShortSingle-valued answer to the question
        Comments

        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

        Control10..1
        BindingThe codes SHALL be taken from For example codes, see 居家護理-成員職稱選項http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
        (required to http://ltc-ig.fhir.tw/ValueSet/hn-vs-94d2d2fdf018)
        TypeCoding, date, dateTime, boolean, string, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summaryfalse
        Requirements

        Ability to retain a single-valued answer to a question.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        180. QuestionnaireResponse.item:Title.item:Value.item
        Definition

        Questions or sub-groups nested beneath a question or group.

        ShortNested questionnaire response items
        Control0..0*
        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
        Is Modifierfalse
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        182. QuestionnaireResponse.item:Title.item:Other
        Slice NameOther
        Definition

        Questions or sub-groups nested beneath a question or group.

        Short補充說明Nested questionnaire response items
        Control0..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        184. QuestionnaireResponse.item:Title.item:Other.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.


        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        186. QuestionnaireResponse.item:Title.item:Other.linkId
        Definition

        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

        ShortPointer to specific item from Questionnaire
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

        Pattern ValueTitle.Other
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        188. QuestionnaireResponse.item:Title.item:Other.answer
        Definition

        The respondent's answer(s) to the question.

        ShortThe response(s) to the question
        Comments

        The value is nested because we cannot have a repeating structure that has variable type.

        Control0..1*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        190. QuestionnaireResponse.item:Title.item:Other.answer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.


        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        192. QuestionnaireResponse.item:Title.item:Other.answer.value[x]
        Definition

        The answer (or one of the answers) provided by the respondent to the question.

        ShortSingle-valued answer to the question
        Comments

        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

        Control10..1
        BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

        Code indicating the response provided for a question.

        Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Ability to retain a single-valued answer to a question.

        Max Length:100
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        194. QuestionnaireResponse.item:Title.item:Other.item
        Definition

        Questions or sub-groups nested beneath a question or group.

        ShortNested questionnaire response items
        Control0..0*
        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
        Is Modifierfalse
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        196. QuestionnaireResponse.item:Statement
        Slice NameStatement
        Definition

        A group or question item from the original questionnaire for which answers are provided.

        Short照護紀錄Groups and questions
        Comments

        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

        Control10..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
        198. QuestionnaireResponse.item:Statement.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        200. QuestionnaireResponse.item:Statement.linkId
        Definition

        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]Pointer to specific item from Questionnaire
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

        Pattern ValueStatement
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        202. QuestionnaireResponse.item:Statement.text
        Definition

        Text that is displayed above the contents of the group or as the text of the question being answered.

        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]Name for group or question text
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        Allows the questionnaire response to be read without access to the questionnaire.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        204. QuestionnaireResponse.item:Statement.answer
        Definition

        The respondent's answer(s) to the question.

        Short問題或量表項目的回覆The response(s) to the question
        Comments

        The value is nested because we cannot have a repeating structure that has variable type.

        Control10..1*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        206. QuestionnaireResponse.item:Statement.answer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        208. QuestionnaireResponse.item:Statement.answer.value[x]
        Definition

        The answer (or one of the answers) provided by the respondent to the question.

        Short回覆的內容。[應填入回覆的內容]Single-valued answer to the question
        Comments

        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

        Control10..1
        BindingFor example codes, see QuestionnaireAnswerCodeshttp://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1
        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

        Code indicating the response provided for a question.

        Typestring, date, dateTime, boolean, Coding, Reference(Resource), Quantity, Attachment, integer, time, decimal, uri
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        Ability to retain a single-valued answer to a question.

        Max Length:200
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        210. QuestionnaireResponse.item:Statement.item
        Definition

        Questions or sub-groups nested beneath a question or group.

        Short問卷的問題或量表項目(用於巢狀問卷)Nested questionnaire response items
        Control0..0*
        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Reports can consist of complex nested groups.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. QuestionnaireResponse
        Invariantshn-casedesc-1: 共照成員職稱選擇其他時應填寫補充說明。 (item.where(linkId='Title').all((item.where(linkId='Title.Value').answer.value.ofType(Coding).where(code='cd2909f1647e7').exists()) implies item.where(linkId='Title.Other').answer.value.exists()))
        hn-casedesc-2: 照護結束時間不可早於開始時間。 (item.where(linkId='Time2').answer.value.single() >= item.where(linkId='Time').answer.value.single())
        2. QuestionnaireResponse.extension
        Control1..?
        SlicingThis element introduces a set of slices on QuestionnaireResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 4. QuestionnaireResponse.extension:episode
          Slice Nameepisode
          Control1..1
          TypeExtension(居家護理-收案關聯) (Extension Type: Reference(居家護理-收案歷程))
          Must Supporttrue
          6. QuestionnaireResponse.questionnaire
          Control1..?
          Pattern Valuehttp://ltc-ig.fhir.tw/Questionnaire/hn-casedesc
          8. QuestionnaireResponse.item
          Control8..?
          SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
          • value @ linkId
          • 10. QuestionnaireResponse.item:CaseID
            Slice NameCaseID
            Short個案身分證字號
            Control1..1
            Must Supporttrue
            12. QuestionnaireResponse.item:CaseID.linkId
            Pattern ValueCaseID
            14. QuestionnaireResponse.item:CaseID.answer
            Control1..1
            16. QuestionnaireResponse.item:CaseID.answer.value[x]
            Control1..?
            Typestring
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Max Length:10
            18. QuestionnaireResponse.item:CaseID.item
            Control0..0
            20. QuestionnaireResponse.item:EndDate
            Slice NameEndDate
            Short收案日期
            Control1..1
            Must Supporttrue
            22. QuestionnaireResponse.item:EndDate.linkId
            Pattern ValueEndDate
            24. QuestionnaireResponse.item:EndDate.answer
            Control1..1
            26. QuestionnaireResponse.item:EndDate.answer.value[x]
            Control1..?
            Typedate
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            28. QuestionnaireResponse.item:EndDate.item
            Control0..0
            30. QuestionnaireResponse.item:Date
            Slice NameDate
            Short照護日期
            Control1..1
            Must Supporttrue
            32. QuestionnaireResponse.item:Date.linkId
            Pattern ValueDate
            34. QuestionnaireResponse.item:Date.answer
            Control1..1
            36. QuestionnaireResponse.item:Date.answer.value[x]
            Control1..?
            Typedate
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            38. QuestionnaireResponse.item:Date.item
            Control0..0
            40. QuestionnaireResponse.item:Time
            Slice NameTime
            Short開始時間
            Control1..1
            Must Supporttrue
            42. QuestionnaireResponse.item:Time.linkId
            Pattern ValueTime
            44. QuestionnaireResponse.item:Time.answer
            Control1..1
            46. QuestionnaireResponse.item:Time.answer.value[x]
            Control1..?
            Typetime
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            48. QuestionnaireResponse.item:Time.item
            Control0..0
            50. QuestionnaireResponse.item:Time2
            Slice NameTime2
            Short結束時間
            Control1..1
            Must Supporttrue
            52. QuestionnaireResponse.item:Time2.linkId
            Pattern ValueTime2
            54. QuestionnaireResponse.item:Time2.answer
            Control1..1
            56. QuestionnaireResponse.item:Time2.answer.value[x]
            Control1..?
            Typetime
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            58. QuestionnaireResponse.item:Time2.item
            Control0..0
            60. QuestionnaireResponse.item:MedicalName
            Slice NameMedicalName
            Short共照成員姓名
            Control1..1
            Must Supporttrue
            62. QuestionnaireResponse.item:MedicalName.linkId
            Pattern ValueMedicalName
            64. QuestionnaireResponse.item:MedicalName.answer
            Control1..1
            66. QuestionnaireResponse.item:MedicalName.answer.value[x]
            Control1..?
            Typestring
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Max Length:50
            68. QuestionnaireResponse.item:MedicalName.item
            Control0..0
            70. QuestionnaireResponse.item:Title
            Slice NameTitle
            Short共照成員職稱
            Control1..1
            Must Supporttrue
            72. QuestionnaireResponse.item:Title.linkId
            Pattern ValueTitle
            74. QuestionnaireResponse.item:Title.answer
            Control0..0
            76. QuestionnaireResponse.item:Title.item
            Control1..?
            SlicingThis element introduces a set of slices on QuestionnaireResponse.item.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
            • value @ linkId
            • 78. QuestionnaireResponse.item:Title.item:Value
              Slice NameValue
              Short選項
              Control1..1
              TypeBackboneElement
              Must Supporttrue
              80. QuestionnaireResponse.item:Title.item:Value.linkId
              Pattern ValueTitle.Value
              82. QuestionnaireResponse.item:Title.item:Value.answer
              Control1..1
              84. QuestionnaireResponse.item:Title.item:Value.answer.value[x]
              Control1..?
              BindingThe codes SHALL be taken from 居家護理-成員職稱選項
              (required to http://ltc-ig.fhir.tw/ValueSet/hn-vs-94d2d2fdf018)
              TypeCoding
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              86. QuestionnaireResponse.item:Title.item:Value.item
              Control0..0
              88. QuestionnaireResponse.item:Title.item:Other
              Slice NameOther
              Short補充說明
              Control0..1
              TypeBackboneElement
              Must Supporttrue
              90. QuestionnaireResponse.item:Title.item:Other.linkId
              Pattern ValueTitle.Other
              92. QuestionnaireResponse.item:Title.item:Other.answer
              Control0..1
              94. QuestionnaireResponse.item:Title.item:Other.answer.value[x]
              Control1..?
              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Max Length:100
              96. QuestionnaireResponse.item:Title.item:Other.item
              Control0..0
              98. QuestionnaireResponse.item:Statement
              Slice NameStatement
              Short照護紀錄
              Control1..1
              Must Supporttrue
              100. QuestionnaireResponse.item:Statement.linkId
              Pattern ValueStatement
              102. QuestionnaireResponse.item:Statement.answer
              Control1..1
              104. QuestionnaireResponse.item:Statement.answer.value[x]
              Control1..?
              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Max Length:200
              106. QuestionnaireResponse.item:Statement.item
              Control0..0

              Guidance on how to interpret the contents of this table can be foundhere

              0. QuestionnaireResponse
              Definition

              A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to.

              ShortA structured set of questions and their answers
              Comments

              The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse.

              Control0..*
              Is Modifierfalse
              Summaryfalse
              Alternate NamesForm, QuestionnaireAnswers
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              hn-casedesc-1: 共照成員職稱選擇其他時應填寫補充說明。 (item.where(linkId='Title').all((item.where(linkId='Title.Value').answer.value.ofType(Coding).where(code='cd2909f1647e7').exists()) implies item.where(linkId='Title.Other').answer.value.exists()))
              hn-casedesc-2: 照護結束時間不可早於開始時間。 (item.where(linkId='Time2').answer.value.single() >= item.where(linkId='Time').answer.value.single())
              2. QuestionnaireResponse.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. QuestionnaireResponse.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. QuestionnaireResponse.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. QuestionnaireResponse.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. QuestionnaireResponse.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. QuestionnaireResponse.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. QuestionnaireResponse.extension
              Definition

              An Extension

              ShortExtension
              Control1..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on QuestionnaireResponse.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 16. QuestionnaireResponse.extension:episode
                Slice Nameepisode
                Definition

                參照此次收案的 EpisodeOfCare。以機構、個案身分證字號及收案日期區分不同次收案。

                Short居家護理-收案關聯
                Control1..1
                This element is affected by the following invariants: ele-1
                TypeExtension(居家護理-收案關聯) (Extension Type: Reference(居家護理-收案歷程))
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                18. QuestionnaireResponse.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                20. QuestionnaireResponse.identifier
                Definition

                A business identifier assigned to a particular completed (or partially completed) questionnaire.

                ShortUnique id for this set of answers
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Summarytrue
                Requirements

                Used for tracking, registration and other business purposes.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. QuestionnaireResponse.basedOn
                Definition

                The order, proposal or plan that is fulfilled in whole or in part by this QuestionnaireResponse. For example, a ServiceRequest seeking an intake assessment or a decision support recommendation to assess for post-partum depression.

                ShortRequest fulfilled by this QuestionnaireResponse
                Control0..*
                TypeReference(CarePlan, ServiceRequest)
                Is Modifierfalse
                Summarytrue
                Requirements

                Supports traceability of responsibility for the action and allows linkage of an action to the recommendations acted upon.

                Alternate Namesorder
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. QuestionnaireResponse.partOf
                Definition

                A procedure or observation that this questionnaire was performed as part of the execution of. For example, the surgery a checklist was executed as part of.

                ShortPart of this action
                Comments

                Composition of questionnaire responses will be handled by the parent questionnaire having answers that reference the child questionnaire. For relationships to referrals, and other types of requests, use basedOn.

                Control0..*
                TypeReference(Observation, Procedure)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. QuestionnaireResponse.questionnaire
                Definition

                The Questionnaire that defines and organizes the questions for which answers are being provided.

                Short這個問卷回覆所回答的問卷。[應填入問卷的 URL]
                Comments

                If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.).

                Control1..1
                Typecanonical(長期照顧-問卷)
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Requirements

                Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form.

                Alternate NamesForm
                Pattern Valuehttp://ltc-ig.fhir.tw/Questionnaire/hn-casedesc
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. QuestionnaireResponse.status
                Definition

                The position of the questionnaire response within its overall lifecycle.

                Short問卷回覆的狀態。[應填入 in-progress / completed / amended / entered-in-error / stopped]
                Comments

                This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

                Control1..1
                BindingThe codes SHALL be taken from QuestionnaireResponseStatus
                (required to http://hl7.org/fhir/ValueSet/questionnaire-answers-status|4.0.1)

                Lifecycle status of the questionnaire response.

                Typecode
                Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Requirements

                The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. QuestionnaireResponse.subject
                Definition

                The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information.

                Short問卷回覆的適用主體
                Comments

                If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types.

                Control1..1
                TypeReference(長期照顧-住民基本資料)
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Allows linking the answers to the individual the answers describe. May also affect access control.

                Alternate NamesPatient, Focus
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                32. QuestionnaireResponse.subject.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                34. QuestionnaireResponse.subject.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on QuestionnaireResponse.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 36. QuestionnaireResponse.subject.reference
                  Definition

                  A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                  Short問卷回覆的適用主體。[應輸入 Patient Resource ID]
                  Comments

                  Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                  Control1..1
                  This element is affected by the following invariants: ref-1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  38. QuestionnaireResponse.subject.type
                  Definition

                  The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                  The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                  ShortType the reference refers to (e.g. "Patient")
                  Comments

                  This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                  Control0..1
                  BindingUnless not suitable, these codes SHALL be taken from ResourceType
                  (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                  Aa resource (or, for logical models, the URI of the logical model).

                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  40. QuestionnaireResponse.subject.identifier
                  Definition

                  An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                  ShortLogical reference, when literal reference is not known
                  Comments

                  When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                  When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                  Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  42. QuestionnaireResponse.subject.display
                  Definition

                  Plain text narrative that identifies the resource in addition to the resource reference.

                  ShortText alternative for the resource
                  Comments

                  This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  44. QuestionnaireResponse.encounter
                  Definition

                  The Encounter during which this questionnaire response was created or to which the creation of this record is tightly associated.

                  ShortEncounter created as part of
                  Comments

                  This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. A questionnaire that was initiated during an encounter but not fully completed during the encounter would still generally be associated with the encounter.

                  Control0..1
                  TypeReference(Encounter)
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Provides context for the information that was captured. May also affect access control.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  46. QuestionnaireResponse.authored
                  Definition

                  The date and/or time that this set of answers were last changed.

                  Short問卷回覆的填寫日期
                  Comments

                  May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured.

                  This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible.

                  Control1..1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers.

                  Alternate NamesDate Created, Date published, Date Issued, Date updated
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  48. QuestionnaireResponse.author
                  Definition

                  Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system.

                  Short問卷回覆的填寫者
                  Comments

                  Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated.

                  Control0..1
                  TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色)
                  Is Modifierfalse
                  Must Supporttrue
                  Must Support TypesNo must-support rules about the choice of types/profiles
                  Summarytrue
                  Requirements

                  Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers.

                  Alternate NamesLaboratory, Service, Practitioner, Department, Company, Performer
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  50. QuestionnaireResponse.author.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  52. QuestionnaireResponse.author.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on QuestionnaireResponse.author.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 54. QuestionnaireResponse.author.reference
                    Definition

                    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                    Short問卷回覆的填寫者。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]
                    Comments

                    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                    Control1..1
                    This element is affected by the following invariants: ref-1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    56. QuestionnaireResponse.author.type
                    Definition

                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                    ShortType the reference refers to (e.g. "Patient")
                    Comments

                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from ResourceType
                    (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                    Aa resource (or, for logical models, the URI of the logical model).

                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    58. QuestionnaireResponse.author.identifier
                    Definition

                    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                    ShortLogical reference, when literal reference is not known
                    Comments

                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..1
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    60. QuestionnaireResponse.author.display
                    Definition

                    Plain text narrative that identifies the resource in addition to the resource reference.

                    ShortText alternative for the resource
                    Comments

                    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    62. QuestionnaireResponse.source
                    Definition

                    The person who answered the questions about the subject.

                    Short誰提供了問卷回覆的資料,意即誰回答了這份問卷
                    Comments

                    If not specified, no inference can be made about who provided the data.

                    Control0..1
                    TypeReference(長期照顧-照顧服務提供者, 長期照顧-關係人, 長期照顧-住民基本資料, 長期照顧-服務人員角色)
                    Is Modifierfalse
                    Must Supporttrue
                    Must Support TypesNo must-support rules about the choice of types/profiles
                    Summarytrue
                    Requirements

                    When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    64. QuestionnaireResponse.source.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    66. QuestionnaireResponse.source.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on QuestionnaireResponse.source.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 68. QuestionnaireResponse.source.reference
                      Definition

                      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                      Short誰提供了問卷回覆的資料。[應輸入 Practitioner / RelatedPerson / Patient / PractitionerRole Resource ID]
                      Comments

                      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                      Control1..1
                      This element is affected by the following invariants: ref-1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      70. QuestionnaireResponse.source.type
                      Definition

                      The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                      The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                      ShortType the reference refers to (e.g. "Patient")
                      Comments

                      This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from ResourceType
                      (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                      Aa resource (or, for logical models, the URI of the logical model).

                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      72. QuestionnaireResponse.source.identifier
                      Definition

                      An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                      ShortLogical reference, when literal reference is not known
                      Comments

                      When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                      When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                      Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                      Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..1
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      74. QuestionnaireResponse.source.display
                      Definition

                      Plain text narrative that identifies the resource in addition to the resource reference.

                      ShortText alternative for the resource
                      Comments

                      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      76. QuestionnaireResponse.item
                      Definition

                      A group or question item from the original questionnaire for which answers are provided.

                      Short問卷回覆的內容
                      Comments

                      Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                      Control8..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                      SlicingThis element introduces a set of slices on QuestionnaireResponse.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                      • value @ linkId
                      • 78. QuestionnaireResponse.item.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        80. QuestionnaireResponse.item.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        82. QuestionnaireResponse.item.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        84. QuestionnaireResponse.item.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        86. QuestionnaireResponse.item.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        88. QuestionnaireResponse.item.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        90. QuestionnaireResponse.item.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control0..*
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        92. QuestionnaireResponse.item.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        94. QuestionnaireResponse.item.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        96. QuestionnaireResponse.item.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        98. QuestionnaireResponse.item.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control0..1
                        BindingFor example codes, see QuestionnaireAnswerCodes
                        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                        Code indicating the response provided for a question.

                        TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Must Support TypesNo must-support rules about the choice of types/profiles
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        100. QuestionnaireResponse.item.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        102. QuestionnaireResponse.item.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        104. QuestionnaireResponse.item:CaseID
                        Slice NameCaseID
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short個案身分證字號
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        106. QuestionnaireResponse.item:CaseID.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        108. QuestionnaireResponse.item:CaseID.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        110. QuestionnaireResponse.item:CaseID.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        112. QuestionnaireResponse.item:CaseID.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueCaseID
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        114. QuestionnaireResponse.item:CaseID.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        116. QuestionnaireResponse.item:CaseID.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        118. QuestionnaireResponse.item:CaseID.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        120. QuestionnaireResponse.item:CaseID.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        122. QuestionnaireResponse.item:CaseID.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        124. QuestionnaireResponse.item:CaseID.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        126. QuestionnaireResponse.item:CaseID.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        BindingFor example codes, see QuestionnaireAnswerCodes
                        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                        Code indicating the response provided for a question.

                        Typestring
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Max Length:10
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        128. QuestionnaireResponse.item:CaseID.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        130. QuestionnaireResponse.item:CaseID.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        132. QuestionnaireResponse.item:EndDate
                        Slice NameEndDate
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short收案日期
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        134. QuestionnaireResponse.item:EndDate.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        136. QuestionnaireResponse.item:EndDate.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        138. QuestionnaireResponse.item:EndDate.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        140. QuestionnaireResponse.item:EndDate.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueEndDate
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        142. QuestionnaireResponse.item:EndDate.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        144. QuestionnaireResponse.item:EndDate.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        146. QuestionnaireResponse.item:EndDate.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        148. QuestionnaireResponse.item:EndDate.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        150. QuestionnaireResponse.item:EndDate.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        152. QuestionnaireResponse.item:EndDate.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        154. QuestionnaireResponse.item:EndDate.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        Typedate
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        156. QuestionnaireResponse.item:EndDate.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        158. QuestionnaireResponse.item:EndDate.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        160. QuestionnaireResponse.item:Date
                        Slice NameDate
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short照護日期
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        162. QuestionnaireResponse.item:Date.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        164. QuestionnaireResponse.item:Date.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        166. QuestionnaireResponse.item:Date.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        168. QuestionnaireResponse.item:Date.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueDate
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        170. QuestionnaireResponse.item:Date.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        172. QuestionnaireResponse.item:Date.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        174. QuestionnaireResponse.item:Date.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        176. QuestionnaireResponse.item:Date.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        178. QuestionnaireResponse.item:Date.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        180. QuestionnaireResponse.item:Date.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        182. QuestionnaireResponse.item:Date.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        Typedate
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        184. QuestionnaireResponse.item:Date.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        186. QuestionnaireResponse.item:Date.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        188. QuestionnaireResponse.item:Time
                        Slice NameTime
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short開始時間
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        190. QuestionnaireResponse.item:Time.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        192. QuestionnaireResponse.item:Time.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        194. QuestionnaireResponse.item:Time.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        196. QuestionnaireResponse.item:Time.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueTime
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        198. QuestionnaireResponse.item:Time.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        200. QuestionnaireResponse.item:Time.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        202. QuestionnaireResponse.item:Time.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        204. QuestionnaireResponse.item:Time.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        206. QuestionnaireResponse.item:Time.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        208. QuestionnaireResponse.item:Time.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        210. QuestionnaireResponse.item:Time.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        Typetime
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        212. QuestionnaireResponse.item:Time.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        214. QuestionnaireResponse.item:Time.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        216. QuestionnaireResponse.item:Time2
                        Slice NameTime2
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short結束時間
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        218. QuestionnaireResponse.item:Time2.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        220. QuestionnaireResponse.item:Time2.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        222. QuestionnaireResponse.item:Time2.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        224. QuestionnaireResponse.item:Time2.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueTime2
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        226. QuestionnaireResponse.item:Time2.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        228. QuestionnaireResponse.item:Time2.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        230. QuestionnaireResponse.item:Time2.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        232. QuestionnaireResponse.item:Time2.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        234. QuestionnaireResponse.item:Time2.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        236. QuestionnaireResponse.item:Time2.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        238. QuestionnaireResponse.item:Time2.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        Typetime
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        240. QuestionnaireResponse.item:Time2.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        242. QuestionnaireResponse.item:Time2.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        244. QuestionnaireResponse.item:MedicalName
                        Slice NameMedicalName
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short共照成員姓名
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        246. QuestionnaireResponse.item:MedicalName.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        248. QuestionnaireResponse.item:MedicalName.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        250. QuestionnaireResponse.item:MedicalName.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        252. QuestionnaireResponse.item:MedicalName.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueMedicalName
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        254. QuestionnaireResponse.item:MedicalName.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        256. QuestionnaireResponse.item:MedicalName.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        258. QuestionnaireResponse.item:MedicalName.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        260. QuestionnaireResponse.item:MedicalName.answer.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        262. QuestionnaireResponse.item:MedicalName.answer.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        264. QuestionnaireResponse.item:MedicalName.answer.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        266. QuestionnaireResponse.item:MedicalName.answer.value[x]
                        Definition

                        The answer (or one of the answers) provided by the respondent to the question.

                        Short回覆的內容。[應填入回覆的內容]
                        Comments

                        More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                        Control1..1
                        BindingFor example codes, see QuestionnaireAnswerCodes
                        (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                        Code indicating the response provided for a question.

                        Typestring
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Ability to retain a single-valued answer to a question.

                        Max Length:50
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        268. QuestionnaireResponse.item:MedicalName.answer.item
                        Definition

                        Nested groups and/or questions found within this particular answer.

                        ShortNested groups and questions
                        Control0..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Summaryfalse
                        Requirements

                        It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        270. QuestionnaireResponse.item:MedicalName.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control0..0
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        272. QuestionnaireResponse.item:Title
                        Slice NameTitle
                        Definition

                        A group or question item from the original questionnaire for which answers are provided.

                        Short共照成員職稱
                        Comments

                        Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                        Control1..1
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                        274. QuestionnaireResponse.item:Title.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        276. QuestionnaireResponse.item:Title.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        278. QuestionnaireResponse.item:Title.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        280. QuestionnaireResponse.item:Title.linkId
                        Definition

                        The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                        Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                        Pattern ValueTitle
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        282. QuestionnaireResponse.item:Title.definition
                        Definition

                        A reference to an ElementDefinition that provides the details for the item.

                        ShortElementDefinition - details for the item
                        Comments

                        The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                        There is no need for this element if the item pointed to by the linkId has a definition listed.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Requirements

                        A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        284. QuestionnaireResponse.item:Title.text
                        Definition

                        Text that is displayed above the contents of the group or as the text of the question being answered.

                        Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Allows the questionnaire response to be read without access to the questionnaire.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        286. QuestionnaireResponse.item:Title.answer
                        Definition

                        The respondent's answer(s) to the question.

                        Short問題或量表項目的回覆
                        Comments

                        The value is nested because we cannot have a repeating structure that has variable type.

                        Control0..0
                        TypeBackboneElement
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        293. QuestionnaireResponse.item:Title.item
                        Definition

                        Questions or sub-groups nested beneath a question or group.

                        Short問卷的問題或量表項目(用於巢狀問卷)
                        Control1..*
                        TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Requirements

                        Reports can consist of complex nested groups.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on QuestionnaireResponse.item.item. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                        • value @ linkId
                        • 295. QuestionnaireResponse.item:Title.item.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          297. QuestionnaireResponse.item:Title.item.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          299. QuestionnaireResponse.item:Title.item.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          301. QuestionnaireResponse.item:Title.item.linkId
                          Definition

                          The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                          Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          303. QuestionnaireResponse.item:Title.item.definition
                          Definition

                          A reference to an ElementDefinition that provides the details for the item.

                          ShortElementDefinition - details for the item
                          Comments

                          The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                          There is no need for this element if the item pointed to by the linkId has a definition listed.

                          Control0..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          305. QuestionnaireResponse.item:Title.item.text
                          Definition

                          Text that is displayed above the contents of the group or as the text of the question being answered.

                          Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Allows the questionnaire response to be read without access to the questionnaire.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          307. QuestionnaireResponse.item:Title.item.answer
                          Definition

                          The respondent's answer(s) to the question.

                          Short問題或量表項目的回覆
                          Comments

                          The value is nested because we cannot have a repeating structure that has variable type.

                          Control0..*
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          309. QuestionnaireResponse.item:Title.item.answer.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          311. QuestionnaireResponse.item:Title.item.answer.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          313. QuestionnaireResponse.item:Title.item.answer.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          315. QuestionnaireResponse.item:Title.item.answer.value[x]
                          Definition

                          The answer (or one of the answers) provided by the respondent to the question.

                          Short回覆的內容。[應填入回覆的內容]
                          Comments

                          More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                          Control0..1
                          BindingFor example codes, see QuestionnaireAnswerCodes
                          (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                          Code indicating the response provided for a question.

                          TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Must Support TypesNo must-support rules about the choice of types/profiles
                          Summaryfalse
                          Requirements

                          Ability to retain a single-valued answer to a question.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          317. QuestionnaireResponse.item:Title.item.answer.item
                          Definition

                          Nested groups and/or questions found within this particular answer.

                          ShortNested groups and questions
                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          319. QuestionnaireResponse.item:Title.item.item
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          Short問卷的問題或量表項目(用於巢狀問卷)
                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          321. QuestionnaireResponse.item:Title.item:Value
                          Slice NameValue
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          Short選項
                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          323. QuestionnaireResponse.item:Title.item:Value.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          325. QuestionnaireResponse.item:Title.item:Value.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          327. QuestionnaireResponse.item:Title.item:Value.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          329. QuestionnaireResponse.item:Title.item:Value.linkId
                          Definition

                          The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                          ShortPointer to specific item from Questionnaire
                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                          Pattern ValueTitle.Value
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          331. QuestionnaireResponse.item:Title.item:Value.definition
                          Definition

                          A reference to an ElementDefinition that provides the details for the item.

                          ShortElementDefinition - details for the item
                          Comments

                          The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                          There is no need for this element if the item pointed to by the linkId has a definition listed.

                          Control0..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          333. QuestionnaireResponse.item:Title.item:Value.text
                          Definition

                          Text that is displayed above the contents of the group or as the text of the question being answered.

                          ShortName for group or question text
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Allows the questionnaire response to be read without access to the questionnaire.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          335. QuestionnaireResponse.item:Title.item:Value.answer
                          Definition

                          The respondent's answer(s) to the question.

                          ShortThe response(s) to the question
                          Comments

                          The value is nested because we cannot have a repeating structure that has variable type.

                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          337. QuestionnaireResponse.item:Title.item:Value.answer.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          339. QuestionnaireResponse.item:Title.item:Value.answer.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          341. QuestionnaireResponse.item:Title.item:Value.answer.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          343. QuestionnaireResponse.item:Title.item:Value.answer.value[x]
                          Definition

                          The answer (or one of the answers) provided by the respondent to the question.

                          ShortSingle-valued answer to the question
                          Comments

                          More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                          Control1..1
                          BindingThe codes SHALL be taken from 居家護理-成員職稱選項
                          (required to http://ltc-ig.fhir.tw/ValueSet/hn-vs-94d2d2fdf018)
                          TypeCoding
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Ability to retain a single-valued answer to a question.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          345. QuestionnaireResponse.item:Title.item:Value.answer.item
                          Definition

                          Nested groups and/or questions found within this particular answer.

                          ShortNested groups and questions
                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          347. QuestionnaireResponse.item:Title.item:Value.item
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          ShortNested questionnaire response items
                          Control0..0
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          349. QuestionnaireResponse.item:Title.item:Other
                          Slice NameOther
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          Short補充說明
                          Control0..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          351. QuestionnaireResponse.item:Title.item:Other.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          353. QuestionnaireResponse.item:Title.item:Other.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          355. QuestionnaireResponse.item:Title.item:Other.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          357. QuestionnaireResponse.item:Title.item:Other.linkId
                          Definition

                          The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                          ShortPointer to specific item from Questionnaire
                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                          Pattern ValueTitle.Other
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          359. QuestionnaireResponse.item:Title.item:Other.definition
                          Definition

                          A reference to an ElementDefinition that provides the details for the item.

                          ShortElementDefinition - details for the item
                          Comments

                          The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                          There is no need for this element if the item pointed to by the linkId has a definition listed.

                          Control0..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          361. QuestionnaireResponse.item:Title.item:Other.text
                          Definition

                          Text that is displayed above the contents of the group or as the text of the question being answered.

                          ShortName for group or question text
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Allows the questionnaire response to be read without access to the questionnaire.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          363. QuestionnaireResponse.item:Title.item:Other.answer
                          Definition

                          The respondent's answer(s) to the question.

                          ShortThe response(s) to the question
                          Comments

                          The value is nested because we cannot have a repeating structure that has variable type.

                          Control0..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          365. QuestionnaireResponse.item:Title.item:Other.answer.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          367. QuestionnaireResponse.item:Title.item:Other.answer.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          369. QuestionnaireResponse.item:Title.item:Other.answer.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          371. QuestionnaireResponse.item:Title.item:Other.answer.value[x]
                          Definition

                          The answer (or one of the answers) provided by the respondent to the question.

                          ShortSingle-valued answer to the question
                          Comments

                          More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                          Control1..1
                          BindingFor example codes, see QuestionnaireAnswerCodes
                          (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                          Code indicating the response provided for a question.

                          Typestring
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          Ability to retain a single-valued answer to a question.

                          Max Length:100
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          373. QuestionnaireResponse.item:Title.item:Other.answer.item
                          Definition

                          Nested groups and/or questions found within this particular answer.

                          ShortNested groups and questions
                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          375. QuestionnaireResponse.item:Title.item:Other.item
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          ShortNested questionnaire response items
                          Control0..0
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          377. QuestionnaireResponse.item:Statement
                          Slice NameStatement
                          Definition

                          A group or question item from the original questionnaire for which answers are provided.

                          Short照護紀錄
                          Comments

                          Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer).

                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          qrs-1: Nested item can't be beneath both item and answer ((answer.exists() and item.exists()).not())
                          379. QuestionnaireResponse.item:Statement.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          381. QuestionnaireResponse.item:Statement.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          383. QuestionnaireResponse.item:Statement.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          385. QuestionnaireResponse.item:Statement.linkId
                          Definition

                          The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource.

                          Short問題或量表項目的唯一識別碼。[應填入獨立的編號]
                          Control1..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier.

                          Pattern ValueStatement
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          387. QuestionnaireResponse.item:Statement.definition
                          Definition

                          A reference to an ElementDefinition that provides the details for the item.

                          ShortElementDefinition - details for the item
                          Comments

                          The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x].

                          There is no need for this element if the item pointed to by the linkId has a definition listed.

                          Control0..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Requirements

                          A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          389. QuestionnaireResponse.item:Statement.text
                          Definition

                          Text that is displayed above the contents of the group or as the text of the question being answered.

                          Short問題或量表項目的內容描述。[應填入問題或量表項目的內容]
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Allows the questionnaire response to be read without access to the questionnaire.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          391. QuestionnaireResponse.item:Statement.answer
                          Definition

                          The respondent's answer(s) to the question.

                          Short問題或量表項目的回覆
                          Comments

                          The value is nested because we cannot have a repeating structure that has variable type.

                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          393. QuestionnaireResponse.item:Statement.answer.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          395. QuestionnaireResponse.item:Statement.answer.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          397. QuestionnaireResponse.item:Statement.answer.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          399. QuestionnaireResponse.item:Statement.answer.value[x]
                          Definition

                          The answer (or one of the answers) provided by the respondent to the question.

                          Short回覆的內容。[應填入回覆的內容]
                          Comments

                          More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire.

                          Control1..1
                          BindingFor example codes, see QuestionnaireAnswerCodes
                          (example to http://hl7.org/fhir/ValueSet/questionnaire-answers|4.0.1)

                          Code indicating the response provided for a question.

                          Typestring
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Ability to retain a single-valued answer to a question.

                          Max Length:200
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          401. QuestionnaireResponse.item:Statement.answer.item
                          Definition

                          Nested groups and/or questions found within this particular answer.

                          ShortNested groups and questions
                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          403. QuestionnaireResponse.item:Statement.item
                          Definition

                          Questions or sub-groups nested beneath a question or group.

                          Short問卷的問題或量表項目(用於巢狀問卷)
                          Control0..0
                          TypeSeettp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Requirements

                          Reports can consist of complex nested groups.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))